(More Studio Mastering Plugins Here)
SubFilterII is an expanded version of the original SubFilter plug-in with a wider range of cutoff frequencies. SubFilterII has a selectable cutoff slope of -12, -24 or -36dB/Octave and a cutoff frequency variable from 10Hz to 1KHz. The filter is extremely useful for removing thumps, bumps and low frequency rumble noise from your audio. The filter has 2 controls: cutoff slope and cutoff frequency. The passband is flat (Butterworth filter) and has unity gain. In addition to audio cleanup tasks, SubFilterII can be used with HyperFilter (below) to create "am radio", "megaphone" and other classic sounds.
TRY IT! 
Download SubFilterII for FREE here. This plug is fully functional
and has no timeout or other restrictions. Download the file SubFilterII.dll and save it to your VST plug-ins folder.
For proper operation this plug-in must be used as an INSERT on channel, group or master
outputs (the processor will produce no output when used as a SEND effect).
Telephone is a simple yet highly realistic telephone audio simulator. This plug-in uses very steep, 6 pole high-pass and low-pass filters to create the telephone audio bandwidth of 350Hz - 3KHz. A granulizer reduces the resolution to 8 bits just like the phone company! Works with both mono and stereo signals.
TRY IT! Download Telephone for FREE here. This plug is fully functional and
has no timeout or other restrictions. Download the file Telephone.dll
and save it to your VST plug-ins folder. For proper operation this plug-in must be
used as an INSERT on channel, group or master outputs (the processor will produce no
output when used as a SEND effect).
HyperFilter is a high frequency filter with a selectable cutoff slope of -12, -24 or -36dB/Octave. The filter is extremely useful for removing hiss, crackles and even sampling noise from your audio. The filter has 2 controls: cutoff slope and cutoff frequency. The cutoff frequency is variable from 1KHz to 20KHz. The passband is flat (Butterworth filter) and has unity gain. The cutoff frequency upper limit is automatically adjusted depending on sample rate (for example, upper limit when used on 22.05KHz sample rate signals is 10KHz).
TRY IT! Download HyperFilter for FREE here. This plug is fully functional
and has no timeout or other restrictions. Download the file HyperFilter.dll and save it to your VST plug-ins folder.
For proper operation this plug-in must be used as an INSERT on channel, group or master
outputs (the processor will produce no output when used as a SEND effect).
SIR Delay adds a fixed 8960 sample delay to the audio path to compensate for the latency of the popular SIR Convolution Reverb in hosts that do not support plugin delay compensation. This plugin allows the use of the popular SIR Convolution Reverb as a send effect in hosts such as Cubase SE and many others. To use this compensator simply insert the plugin in all channels or groups where the SIR reverb is NOT being used. This will time-align (delay) these channels so they are in time with the channel(s) being processed through the SIR Reverb.
For more information on the SIR Convolution Reverb and how to use the SIR Delay Compensator see these links:
www.knufinke.de/sir/index_en.html - General information
www.knufinke.de/sir/support.html#send - Information on how to compensate for latency using groups and sends
TRY IT! Download SIR Delay for FREE here. This plug is fully functional and
has no timeout or other restrictions. Download the file SIRdelay.dll
and save it to your VST plug-ins folder. For proper operation this plug-in must be
used as an INSERT on channel, group or master outputs (the processor will produce no
output when used as a SEND effect).
SimpleQ is a FREE plug-in that emulates the simple Bass/Treble tone controls found on stereos and smaller mixing consoles. While simple in operation, this plug in is extremely useful. SimpleQ is a "shelving" equalizer that can boost or cut the high or low frequencies by up to 10dB.
TRY IT! Download SimpleQ for FREE here. This plug is fully functional and
has no timeout or other restrictions. Download the file SimpleQ.dll and save it to your VST
plug-ins folder. For proper operation this plug-in must be used as an INSERT on
channel or master outputs (the processor will produce no output when used as a SEND
effect).
The Saturator is a FREE plug-in that emulates the non-linear curve of analog tape in saturation. The Saturator can add up to 6dB of gain to the signal to push it into overdrive whereby soft clipping begins. When used properly the Saturator can add that "analog sound" to your tracks or can be used to boost low level signals giving them an "analog edge".
TRY IT! Download the Saturator for FREE here. This plug is fully functional
and has no timeout or other restrictions. Download the file Saturator.dll
and save it to your VST plug-ins folder. For proper operation this plug-in must be
used as an INSERT on channel or master outputs (the processor will produce no output when
used as a SEND effect).
Flipper is a simple little plug that does an important job. It takes the input signal, in either mono or stereo, and inverts the polarity (a.k.a., "Phase Invert") just like the "Phase Invert" button found on most larger mixing consoles. If your mono or stereo tracks sound unusually thin it could be because of phase problems. You can flip the phase of a wave file using wave editors but once you do you're more or less stuck with the result. Instead, INSERT Flipper into your mixer channel INSERT and try it out in real time. Flipper can also be used to purposely generate out of phase signals or as a simple "Vocal eliminator" on stereo mixes (flip the phase of one side and mix the stereo tracks together in mono - whatever was centered in the mix will disappear).
TRY IT! Download Flipper for FREE here. This plug is fully
functional and has no timeout or other restrictions. Download the file Flipper.dll and
save it to your VST plug-ins folder. For proper operation this plug-in must be used
as an INSERT on channel or master outputs (the processor will produce no output when used
as a SEND effect).
VST is a trademark of Steinberg Soft-und Hardware GmbH
Windows is a registered trademark of Microsoft Corporation
All plugins listed on this page have been written by Jeff Rippe, Copyright 2002-2008.
RETURN TO HOME PAGE